Abstract
Iron/copper bimetallic nanoparticles based sludge biochar (Fe/Cu-SBC) was prepared by using a modified co-precipitation route. The Fe/Cu-SBC system prepared was subsequently applied to activate periodate (IO4−) to degrade diclofenac sodium (DCF) by using UV light at room temperature (25 °C). The physicochemical properties of both SBC and Fe/Cu-SBC such as morphology, physical properties, crystal structures and functional groups were examined. The type and number of surface functional groups were found to be increased and the catalytic performance was improved by the modification of Fe/Cu bimetallic nanoparticles. The influence of various parameters to evaluate the catalytic efficiency such as periodate (PI) concentration, dosage of catalysts, UV power, initial pH and coexisting anions were investigated. Under the optimized conditions (pH 6.9, UV-power 60 W, PI concentration of 5 mM and 0.1 g Fe/Cu-SBC), it was observed that 99.7% of DCF was degraded with a pseudo-first-order kinetics reaction constant 9.39 × 10−2 min−1. The radical scavenging experiments showed that IO3[rad] radicals were the predominantly reactive oxidants in the Fe/Cu-SBC/UV system. Therefore, this investigation provides a feasible alternative for the degradation of PPCPs in wastewater.
Original language | English |
---|---|
Article number | 146974 |
Journal | Science of the Total Environment |
Volume | 783 |
DOIs | |
Publication status | Published - 20 Aug 2021 |
Keywords
- Diclofenac sodium
- Iodate
- Periodate
- Sludge biochar
- Thermometal