Microstructural analysis of varistors prepared from nanosize ZnO

S. C. Pillai, J. M. Kelly, D. E. McCormack, R. Ramesh

Research output: Contribution to journalArticlepeer-review

31 Citations (Scopus)

Abstract

ZnO nanoparticles were prepared by a solid state pyrolysis reaction of zinc acetate dihydrate and oxalic acid dihydrate at 500°C. The course of reaction at various temperatures was followed by XRD. Subsequently varistors were fabricated from this nano-ZnO material by solid state mixing with various oxide additives and sintering to 1050°C. The microstructure of the sintered material was studied using XRD, field emission SEM (FESEM), and EDX, and ZnO grains, bismuth rich regions and spinel phases were identified. Discs made from oxide doped nano-ZnO show considerably higher breakdown voltage (656±30 V mm-) compared to those prepared from micrometre sized ZnO (410±30 V mm-1) and commercial varistors (454±30 V mm-1). However, varistors made from the nano-ZnO show very low densification and high leakage current, making them unsuitable for device fabrication.

Original languageEnglish
Pages (from-to)964-968
Number of pages5
JournalMaterials Science and Technology
Volume20
Issue number8
DOIs
Publication statusPublished - Aug 2004
Externally publishedYes

Keywords

  • Breakdown voltage
  • Nanostructures
  • Varistors
  • Zinc oxide

Fingerprint

Dive into the research topics of 'Microstructural analysis of varistors prepared from nanosize ZnO'. Together they form a unique fingerprint.

Cite this